This is a demo store. No orders will be fulfilled.

Thruster Bow PRO 65 kgf 12V tunnel Dia.185mm

AED 16,611.00 Excl. tax

Stock Status: In stock

EEPN 06.07.0080 | OEM BOWA0651

Download Document

document-text

Description

Thruster Bow PRO 65 kgf 12V tunnel Dia.185mm Optimal tunnel length is 370-740mm Maximum tunnel length is 1110mm both the measurements taken at bottom end of the tunnel.

Bow thruster proportional brushless 65 kgf, 12V in 185mm tunnel with extended run time

Revolution: The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has unlimited* runtime! The induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12 V and 24 V, making the new bow thruster suitable for almost all boats!
Evolution: The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece.Retrofitting a BOW PRO thruster therefore is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.

  • Reliable & proportional control
  • Unlimited* run-time
  • Brushless (no maintenance & ignition protected)
  • Hold-function for easy docking
  • Highly efficient (up to 93%)
  • Safe & Easy to install
  • Backwards compatible: easily upgrade existing Vetus C & D series bow thrusters
  • THE solution for charter boats
  • More of these revolutionary models will follow shortly!

(*) The only limitation is the size of your battery bank.

cog

General Specification

Part number 06.07.0080
Model BOWA0651
Thrust in N (kgf) (power output) 650 (65)
Power kW 3.1
Brushless induction motor ✓
Tunnel diameter, internal, mm 185
Weight excl. tunnel, in kg 35
For DC Systems, Volt 12
Current consumption, Amps. 237
Operating time:
• continuously at maximum thrust, in minutes
• at reduced thrust

10
Endurance rated
Main fuse ZE355 (355 Amps)
Batteries 12 Volt D.C., min. Ah 1 x 125
Battery main switch, model BATSW 250
Press to skip carousel

More from Vetus

End piece set Black for TRAP70 rubbing strake
In stock
AED 40.00
EEPN 01.14.0068 OEM ETRAP70B
End piece set White for POLY35 rubbing strake
In stock
AED 48.00
EEPN 01.14.0072 OEM EPOLY35W
Rubbing Strake ROND4248 Grey Dia. 48mm, coil of 20m (price per coil)
In stock
Special Price AED 954.85
35% OFF |
Regular Price AED 1,469.00
EEPN 01.14.0045 OEM ROND4248
Rubbing Strake ROND4248 Grey Dia. 48mm, coil of 20m (price per coil)
Inlay SS TRAP30S strip 2 mtr for rubbing strake TRAP5S price per piece
In stock
AED 370.00
EEPN 01.14.0060 OEM TRAP30S
Waterlock LP40R Rotating Inlet/Fixed Outlet for 40 mm Hose 4.3 L Capacity
In stock
AED 850.00
EEPN 02.04.0024 OEM WLOCKL40R
Waterlock MGS 45° Inlet 127 mm/Outlet 152 mm 75 L Capacity Rotatable Top
In stock
AED 4,713.00
EEPN 02.04.0088 OEM MGS5456A
Gooseneck Exhaust LT6565 Inlet 65 mm/Outlet 65 mm
In stock
Special Price AED 712.40
35% OFF |
Regular Price AED 1,096.00
EEPN 02.04.0051 OEM LT6565
Gooseneck Exhaust LT6565 Inlet 65 mm/Outlet 65 mm
Loading...

Adding to Wish List...