This is a demo store. No orders will be fulfilled.

Thruster Bow PRO 36 kgf 12V tunnel Dia.125mm

AED 14,235.00 Excl. tax

Stock Status: Out of stock

EEPN 06.07.0077 | OEM BOWA0361

Download Document

document-text

Description

Thruster Bow PRO 36 kgf 12V tunnel Dia.125mm Optimal tunnel length is 250-500mm Maximum tunnel length is 750mm both the measurements taken at bottom end of the tunnel.

Bow thruster proportional brushless 36 kgf, 12V in 125mm tunnel with extended run time

Revolution: The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has unlimited* runtime! The induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12 V and 24 V, making the new bow thruster suitable for almost all boats!
Evolution: The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece.Retrofitting a BOW PRO thruster therefore is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.

  • Reliable & proportional control
  • Unlimited* run-time
  • Brushless (no maintenance & ignition protected)
  • Hold-function for easy docking
  • Highly efficient (up to 93%)
  • Safe & Easy to install
  • Backwards compatible: easily upgrade existing Vetus C & D series bow thrusters
  • THE solution for charter boats
  • More of these revolutionary models will follow shortly!

(*) The only limitation is the size of your battery bank.

cog

General Specification

Part number 06.07.0077
Model BOWA0361
Thrust in N (kgf) (power output) 360 (36)
Power kW 1.6
Brushless induction motor ✓
Tunnel diameter, internal, mm 125
Weight excl. tunnel, in kg 24
For DC Systems, Volt 12
Current consumption, Amps. 240
Operating time:
• continuously at maximum thrust, in minutes
• at reduced thrust

10
Endurance rated
Main fuse ZE355 (355 Amps)
Batteries 12 Volt D.C., min. Ah 1 x 125
Battery main switch, model BATSW 250
Press to skip carousel

More from Vetus

Waterlock LP60 Fixed Connections for 60 mm Hose 10.5 L Capacity
In stock
AED 1,490.00
EEPN 02.04.0028 OEM WLOCKLP60
Hose connector plastic Dia. 75 mm 60 deg. bend (suitable for connection with rubber transom exhaust)
In stock
AED 264.00
EEPN 02.04.0140 OEM SLVBG75K
Muffler Exhaust MP60 for 60 mm Hose
In stock
Special Price AED 417.95
35% OFF |
Regular Price AED 643.00
EEPN 02.04.0043 OEM DEMPMP60
Muffler Exhaust MP60 for 60 mm Hose
Tank Waste water system 88L 12V (includes plastic tank fitted with pump, sender & suction pipe excluding inlet fitting)
In stock
AED 5,742.00
EEPN 04.03.0046 OEM WWS8812B
Tank fresh water Flexible 55L rectangular with fittings
In stock
AED 774.00
EEPN 04.03.0017 OEM TANKW55
Tank fitting FT19B Dia. 19 mm 90 deg. hose connector for flexible tank
In stock
AED 129.00
EEPN 04.04.0025 OEM FT19B
Thru-Hull Fitting Chamfered Stainless Steel 1-1/4" BSP
In stock
AED 294.00
EEPN 04.06.0092 OEM THRU11/4S
Loading...

Adding to Wish List...