Woodfinish matte 500ml
Stock Status: Out of stock
Note: Only quantities are available in stock. Currently out of stock. Please request a quote.
Description
A clear satin finish for use over Epifanes woodfinish gloss (one-component). Provides a beautiful, satin sheen for interior use.
Thinner : Brush application - Epifanes brush thinner for paint & varnish.
Spray application - Epifanes spray thinner for paint & varnish.
Recoatable : After 24 hours at 18°C (65°F.)
Coverage : One liter is sufficient for 12 m² (130 ft²)
General Specification
| Coats | First | Second |
| Product | Epifanes Woodfinish Matte | Epifanes Woodfinish Matte |
| Thinner | Brush Thinner P&V | Brush Thinner P&V |
| Thinning Ratio % | 0-5 | 0-5 |
| Drying Time hrs | 12 at 65F/18C | 12 at 65F/18C |
| Abrasive paper grit | 320 - 400 | 400 |
| Abrasive type | Wet or Dry | Wet or dry |
| Coverage/liter | 140 sq. feet | 140 sq. feet |
| Remarks | Always stir | If recoated within 72 hours sanding is not required. |
Maintenance:
If existing coats of varnish are intact, one or more coats of Epifanes Woodfinish Matte may be applied on a well cleaned, degreased and lightly sanded surface.
An existing varnish system in poor condition must be removed. Weathered spots may be treated with a cleaning or bleaching product.
If either are used, wash down the surface thoroughly with fresh water in order to remove any residue. Allow the surface to dry.
Smaller spots needing repair may be filled with several coats of Woodfinish Gloss or Clear Gloss Varnish.
When an equal level has been achieved, sand to a smooth surface and apply one or more coats of Woodfinish Matte on the entire surface.
More from Epifanes
