This is a demo store. No orders will be fulfilled.

Woodfinish Gloss 500 ml

AED 100.00 Excl. tax

Stock Status: Out of stock

EEPN 13.02.0017 | OEM WFG.500
document-text

Description

A clear, high gloss varnish-like finish with excellent adhesion to new teak and other exotic woods. For use where a glossy, varnished look is desired. Sanding between coats is not required when the next coat is applied within 72 hours. To be used on teakwood, iroco and as an alternative for continuous maintenance of wood oil systems, for interior and exterior work above the waterline in both fresh and salt water environments. When applied on non-oily wood that does not need to “breath” a minimum of 8-10 coats is required. Not suited on bankirai.

Thinner : Brush application - Epifanes brush thinner for paint & varnish.
                Spray application - Epifanes spray thinner for paint & varnish.
Recoatable : After 24 hours at 18°C (65°F.). No sanding required if recoated within 72 hours.
Coverage : One liter is sufficient for 12 m² (130 ft²).

cog

General Specification

System on oily and resinous woods (i.e. teak)
Coats First 4 more
Product Epifanes WFG Epifanes WFG
Thinner Thinner P&V Thinner P&V
Thinning Ratio % 25 0-5
Drying Time hrs 24 at 65F 24 at 65F
Abrasive if desired 320 400
Abrasive Type Dry Wet or dry
Coverage/liter 130 sq. feet 130 sq. feet
Remarks Next coat within 72 hours does not need sanding.

 

System on non-oily and non-resinous woods
Coats First Second Third At least 4 more
Product Epifanes WFG Epifanes WFG Epifanes WFG Epifanes WFG
Thinner Thinner P&V Thinner P&V Thinner P&V Thinner P&V
Thinning Ratio % 50 25 15 0-5
Drying Time hrs 24 at 65F. 24 at 65F. 24 at 65F. 24 at 65F.
Abrasive if desired 220 280 280 400
Abrasive type Dry Dry Wet or Dry Wet or Dry
Coverage/liter 200-250 sq. feet 160-200 sq. feet 130-160 sq. feet 130 sq. feet
Remarks Next coat within 72 hours does not need sanding.

 

Maintenance:
If the existing coats of Wood Finish gloss are intact and only a degrease of gloss is noticed, one or more coats may be applied on a well cleaned, degreased and sanded surface. 
Prepare the surface with 320 grit wet or dry abrasive paper. For the annual maintenance of Wood Finish Gloss over non-oily woods, apply a minimum of one or two coats, on a well cleaned, degreased and sanded surface.

Press to skip carousel

More from Epifanes

Easy flow 500 ml
In stock
AED 66.00
EEPN 13.02.0028 OEM EF.500
Varnish Clear Satin Poly-urethane 500 + 250gm 2 Components
In stock
AED 239.00
EEPN 13.02.0024 OEM PUCS.750
Thinner for PU 500 ml (Brush)
In stock
AED 71.00
EEPN 13.02.0039 OEM PUTB.500
Woodfinish Gloss 1L
In stock
AED 177.00
EEPN 13.02.0018 OEM WFG.1
Varnish Rubbed Effect 1L
In stock
AED 180.00
EEPN 13.02.0015 OEM RE.1
Polish Seapower for metals 227 gm
In stock
AED 93.00
EEPN 13.01.0080 OEM SPMP.227
Thinner for PU 500 ml (Spray)
In stock
AED 57.00
EEPN 13.02.0046 OEM PUTS.500
Loading...

Adding to Wish List...