This is a demo store. No orders will be fulfilled.

Vent air suction ASV060 louvred oval anodized Aluminium frame & grill

AED 956.00 Excl. tax

Stock Status: Out of stock

EEPN 05.09.0077 | OEM ASV060A
document-text

Description

Louvered air suction vent type ASV060A
Without Dorade box
The frame is made of polished anodised aluminium and the grilles of naturally anodised aluminium.

A marine diesel engine needs sufficient air in order to function correctly. 
The volume of combustion air required is approximately 6.1 m³ per kW (4.5 m³ per hp) per hour, based on a maximum air velocity of 3m/sec.
In addition to combustion air, the engine also requires sufficient ventilation air to dissipate the radiated heat. 
The volume of ventilation air required is about the same as the combustion air needed. 
The design of the VETUS air suction vents is based on these principles. 
The model numbers given in the table relate to the engine horsepower for which they are suitable. 
When designing the engine room layout, it is therefore easy to calculate the size of the air vents required. 
Do not forget to allow for extra vents to extract the heat from the engine space as well. 

For example: 
A boat with an engine of 60 hp will require for the combustion and ventilation air, 
2 louvred air suction vents type 60 (1 x Starboard + 1 x Port) or 4 type 30 vents (2 x Starboard + 2 x Port).

cog

General Specification

No specifications available.

Press to skip carousel

More from Vetus

Transom exhaust rubber TRC50R for 50 mm ID exhaust hose (use plastic connector of suitable size for hose connection. Refer part 02.04.0135 to 02.04.0156)
In stock
AED 369.00
EEPN 02.04.0113 OEM TRC50R
Tank Waste water system 120L 24V (includes plastic tank fitted with pump, sender & suction pipe excluding inlet fitting)
In stock
AED 6,212.00
EEPN 04.03.0049 OEM WWS12024B
Tank waste water Flexible 55L with fittings
In stock
AED 1,311.00
EEPN 04.03.0050 OEM TANKV55
DWHOSE28B Fresh Water Hose – 28mm ID x 36mm OD – Sold per Metre
In stock
AED 24.00
EEPN 04.12.0061 OEM DWHOSE28B
Hatch Deck PLANUS PLA40L 374x374mm Cut-Out Anodised Aluminium Frame CE Area II
In stock
Special Price AED 696.00
50% OFF |
Regular Price AED 1,392.00
EEPN 05.07.0028 OEM PLA40L
Hatch Deck PLANUS PLA40L 374x374mm Cut-Out Anodised Aluminium Frame CE Area II
Cable 3 m extension to connect
In stock
AED 1,173.00
EEPN 07.01.0018 OEM DCHFSB
Wiper motor RW08A 12V 25 mm spindle with parallel end
In stock
AED 444.00
EEPN 05.13.0244 OEM RW08A
Loading...

Adding to Wish List...