Valve non return Black 3/4" BSP GRP
Stock Status: In stock
Note: Only quantities are available in stock. Currently out of stock. Please request a quote.
Description
Description
Non-Return Valve Tail 25mm 1" BSP
Black colour
Note: When used on a Ball Valve, the flow direction goes into the Ball Valve, not out.
Trudesign non-return valves made of fibreglass-reinforced nylon. Temperature resistant up to 65°C (short-term up to 93°C) and pressure resistant up to 150 psi (short-term up to 230 psi).
Tru-Design non-return valves are designed for marine. Made from UV stabilized glass reinforced nylon, these composite material fittings are designed for the harsh marine. They can be used in line to prevent water backflow or siphoning and have a very low cracking pressure.
Note: These non return valves are not suitable to be used in black water system
General Specification
• Manufactured from a high strength, UV stabilised glass reinforced nylon composite - high strength and lightweight. Can be used in direct sunlight
• High impact and tensile strength - “Water hammer safe” and insensitive to pressure shocks in the pipeline
• Stainless spring - No corrosion issues or risk of internal valve staying open
• Low cracking pressure - Minimal pressure required to open the valve with minimal restriction on flowrate
• In line fitting - Minimal installation room needed and no other fittings required
• Printed white arrow (opposite logo side) - Quick and easy identification of water flow direction
More from Tru Design
