This is a demo store. No orders will be fulfilled.

Thruster Bow 95 kgf 24V ignition protected tunnel dia.185mm

AED 20,796.00 Excl. tax

Stock Status: Out of stock

EEPN 06.07.0048 | OEM BOW9524DI
document-text

Description

Thruster Bow 95 kgf 24V ignition protected tunnel dia.185mm IP65 Optimal tunnel length is 370-740mm Maximum tunnel length is 1110mm both the measurements taken at bottom end of the tunnel.

Bow thruster 95 Kgf, 24V, tunnel Ø 185 mm IP65 
VETUS ignition protected bow thruster with 95 kgf thrust force, suitable for boats from 12 to 17 metres in length. 24 Volt version.

Installing an electric bow or stern thruster in a petrol (gasoline) engined boat can be very dangerous, due to the possibility of the electric motor igniting fuel vapour. In order to eliminate the risk, this special housing will shield the bow or stern thruster from potentially explosive vapour. The housing enables the thruster to comply with the ISO 8846 marine “ignition protection” standard. In addition to the standard thruster, the set consists of a watertight (IP65) housing for the electric motor and relays, together with all required seals, electrical connectors and fastening components. An automatic fuse for the control loom is also supplied. This can be reset externally without opening the housing. For both 12 and 24 volt supply. They can also be used as stern thrusters, in combination with the appropriate kit. Because the motor housing is watertight, these sets are also ideal for use where the bow or stern thruster is installed in a wet or humid space.

cog

General Specification

Part number 06.07.0048
Model BOW9524DI
PROPORTIONAL No
THRUST (N / KGF) 105
POWER (KW) 5.7
INTERNAL TUNNEL DIAMETER (MM) 185
WEIGHT (KG) 30
VOLTAGE (V) 24
CURRENT CONSUMPTION (A) 320
CONTINUOUS OPERATING TIME (MIN) 3.5
IGNITION PROTECTED Yes
RETRACTABLE No
EXTENDED RUNTIME No
Press to skip carousel

More from Vetus

Tank Waste water system 42L 24V (includes plastic tank fitted with pump, sender & suction pipe excluding inlet fitting)
In stock
AED 5,334.00
EEPN 04.03.0043 OEM WWS4224B
Tank fitting FT16B Dia. 16 mm 90 deg. hose connector for flexible tank
In stock
AED 129.00
EEPN 04.04.0024 OEM FT16B
Thru-Hull Fitting Chamfered Stainless Steel 1" BSP
In stock
AED 190.00
EEPN 04.06.0091 OEM THRU1S
Hose connector M SS316 1/2"x15mm hose tail (BSP thread)
In stock
AED 26.00
EEPN 04.08.0545 OEM QA05MD-15
MWHOSE32 Cooling Water Hose – 32mm ID x 41mm OD – Sold per Metre
In stock
AED 126.00
EEPN 04.12.0003 OEM MWHOSE32
MWHOSE38 Cooling Water Hose – 38mm ID x 47mm OD – Sold per Metre
In stock
AED 149.00
EEPN 04.12.0004 OEM MWHOSE38
SLANG50 Rubber Exhaust Hose – 51mm ID x 59mm OD – Sold per Metre
In stock
AED 179.00
EEPN 04.12.0022 OEM SLANG50
Loading...

Adding to Wish List...