Rapid clear 750 ml
Stock Status: Out of stock
Note: Only quantities are available in stock. Currently out of stock. Please request a quote.
Description
Superior quality, semi-gloss wood finish based on modified alkyd / urethane resins and UV filters. Rapidclear, providing excellent protection in all climates, is the answer for a quick and easy alternative to conventional varnish. For long term protection and enhancement of all interior and exterior marine and household woods above the waterline. Epifanes Rapidclear provides an enhancing UV protecting film. It bonds extremely well to teak and other oily woods, preventing discolouration and emphasizes the natural grain of the wood. Epifanes Rapidclear can be used for renewing weathered areas, prior to a varnish or as a full system for those requiring a quick and easy semi-gloss finish with excellent breathing properties, flexibility, maximum durability, UV protection and longevity. Apply by brush, foam brush, roller or spray 3 to 4 coats. Rapidclear can be applied every 5-6 hours. Three to four coats are sufficient under most conditions. Sanding between coats is not required. If topcoated with varnish, sand with 220 grit dry abrasive paper. Easy touch up and maintenance.
Thinner : Brush application - Do not thin
Spray application - Epifanes spraythinner for paint & varnish
Recoatable : After 5-6 hours at 18°C (65°F.)
Coverage : 750 ml is sufficient for 10 m².
General Specification
| Coats | First | Second | Third | Fourth (optional) |
| Product | Epifanes Rapidcoat | Epifanes Rapidcoat | Epifanes Rapidcoat | Epifanes Rapidcoat |
| Thinner | N/A | N/A | N/A | N/A |
| Thinning Ratio % | N/A | N/A | N/A | N/A |
| Drying Time hrs | 5-6 at 65F./18C | 5-6 at 65F./18C | 5-6 at 65F./18C | 5-6 at 65F./18C |
| Abrasive paper grit | N/A | N/A | N/A | N/A |
| Abrasive type | N/A | N/A | N/A | N/A |
| Coverage /liter | 150 sq. feet | 150 sq. feet | 150 sq. feet | 150 sq. feet |
| Remarks | none | |||
Maintenance:
If existing coats of Rapidclear are intact, one or more coats may be applied on a well cleaned, and degreased surface.
For annual maintenance, apply a minimum of one or two coats of Epifanes Rapidclear. The number of maintenance coats needed depends on the condition of the Rapidclear system.
The weather and atmospheric conditions to which the finish is subjected will determine the amount of time between maintenance coats.
Bare or weathered areas may be treated with a cleaning or bleaching product. If either are used, wash down the surface thoroughly with fresh water in order to remove any residue.
Allow the surface to dry. Sand and apply three coats of Rapidclear as per instructions.
