This is a demo store. No orders will be fulfilled.

Pump waste (RunDry macerator) 12V (18590 series)

AED 977.00 Excl. tax

Stock Status: In stock

EEPN 04.14.0025 | OEM 18590-2092

Download Document

document-text

Description

WASTE EVACUATION

The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self-priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation

It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued buildup of sediment in the tank which could cause a potential blockage.

FISH BOX AND LIVEWELL TANK EVACUATION

The Jabsco Macerator Pump is the ideal pump for the emptying of fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.

Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed by the Jabsco Macerator Pump, and the self-priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.

cog

General Specification

18590-2092 Macerator pump 12V dc

  • Connections: - for 38mm (1½”) bore inlet hose, 25mm (1”) bore discharge hose
  • Dimensions: - 290mm long, 120mm wide, 95mm high
  • Fuse Size: - 20(amp)
  • Output: - up to 43 litres/minute (9 gallons/minute) at 3m total head. Maximum recommended total head 6m
  • Compact toilet waste macerator pump
  • 15 minute rated, for use with waste holding tanks up to 900 litres (200 gallons) capacity
  • Grinds raw toilet waste to a uniform slurry for easy transfer and discharge
  • Self-priming up to 0.6m vertical lift
  • Fully sealed motor with Dry-Run protection device
  • Heavy duty 4 blade chopper
  • Packaged Dimensions: L:30.00 x H:9.00 x W:13.00cm
  • Actual Weight: 2.19 Kg  (Approx. 2.69 Kg packed)
Press to skip carousel

More from Jabsco

Valve non-return in-line for 25 mm hose
In stock
AED 123.00
EEPN 04.15.0040 OEM 29295-1000
Pump clutch 1B pulley 24V 79 Gpm flanged port Bronze body 66 Gpm for bilge & deckwash application
In stock
Special Price AED 6,665.75
35% OFF |
Regular Price AED 10,255.00
EEPN 04.16.0156 OEM 50270-0311
Pump clutch 1B pulley 24V 79 Gpm flanged port Bronze body 66 Gpm for bilge & deckwash application
Blower flangemount HD 7.1 m3/min 12V
In stock
AED 2,114.00
EEPN 05.05.0006 OEM 35760-0092
Impeller GG neoprene drive 3 blade 12 Dia. 82.5 mm 73.4 mm wide shaft Dia. 21 mm Brass insert (display pack)
In stock
AED 715.00
EEPN 04.23.0025 OEM 18958-0001-P
Impeller K neoprene drive3 blade12 Dia. 57 mm 31.5 mm wide shaft Dia. 16 mm Brass insert with grease, gasket & O ring (display pack)
In stock
Special Price AED 224.25
35% OFF |
Regular Price AED 345.00
EEPN 04.23.0036 OEM 4568-0001-P
Impeller K neoprene drive3 blade12 Dia. 57 mm 31.5 mm wide shaft Dia. 16 mm Brass insert with grease, gasket & O ring (display pack)
Impeller M neoprene drive3 blade8 Dia. 65 mm 51 mm wide shaft Dia. 16 mm Brass insert with grease & gasket (display pack)
In stock
AED 463.00
EEPN 04.23.0047 OEM 4598-0001-P
Impeller O neoprene drive7 W88.9 mm blade9 Dia. 95 mm shaft Dia. 25.4 mm Brass insert without grease & gasket (box pack)
In stock
Special Price AED 839.15
35% OFF |
Regular Price AED 1,291.00
EEPN 04.23.0055 OEM 6760-0001B
Impeller O neoprene drive7 W88.9 mm blade9 Dia. 95 mm shaft Dia. 25.4 mm Brass insert without grease & gasket (box pack)
Loading...

Adding to Wish List...