This is a demo store. No orders will be fulfilled.

Pump Centrifugal Cyclone 12V High Pressure BSP

AED 3,104.00 Excl. tax

Stock Status: Out of stock

EEPN 04.16.1003 | OEM 50860-2012
document-text

Description

Description

The 50860-2012 is a stainless steel centrifugal pump with a 3/4 Inch BSP Ports, coupled to a 12 Volt DC Motor. The High Pressure Cyclone is a long-life pump that delivers flows of up to 21 GPM (80 LPM) and pressures up to 17 psi (1.2 bar), making it ideal for general transfer and circulation duties for water and mild chemicals where more restrictions are present. It can be used in conjunction with trigger nozzles.

These circulation pumps are designed for reliability and ease of use. Centrifugal pumps are the correct product for closed-circuit circulation systems, such as livewell circulation, washdown, central heating and other flooded suction applications.

The Cyclone can be mounted on any flat surface. The pump must be installed below the lowest fluid level to maintain flooded suction. This pump can be run dry for short periods of time, and it can be run against a closed discharge.

cog

General Specification

No specifications available.

Press to skip carousel

More from Jabsco

Strainer 90 deg. plugin + quad male fitting with #40 SS mesh for water pressure system
In stock
AED 165.00
EEPN 04.21.0088 OEM 46400-9500
Blower flexmount 4.2 m3/min 12V
In stock
AED 1,166.00
EEPN 05.05.0011 OEM 36740-0000
Impeller HH neoprene drive7 blade 10 Dia. 57 mm 51 mm wide shaft Dia. 16 mm Brass insert with grease & gasket (display pack)
In stock
Special Price AED 178.10
35% OFF |
Regular Price AED 274.00
EEPN 04.23.0030 OEM 18777-0001-P
Impeller HH neoprene drive7 blade 10 Dia. 57 mm 51 mm wide shaft Dia. 16 mm Brass insert with grease & gasket (display pack)
Impeller O nitrile drive 7 W 63 mm blade 9 Dia. 95 mm shaft Dia. 25.4 mm Brass insert (display pack)
In stock
Special Price AED 203.45
35% OFF |
Regular Price AED 313.00
EEPN 04.23.0053 OEM 836-0003-P
Impeller O nitrile drive 7 W 63 mm blade 9 Dia. 95 mm shaft Dia. 25.4 mm Brass insert (display pack)
Impeller Y neoprene drive4 blade10 Dia. 65 mm (display pack)
In stock
Special Price AED 207.35
35% OFF |
Regular Price AED 319.00
EEPN 04.23.0069 OEM 17954-0001-P
Impeller Y neoprene drive4 blade10 Dia. 65 mm (display pack)
Switch panel 2Way 12/24/32V for bilge pump
In stock
AED 194.00
EEPN 04.16.0069 OEM 49
Pump PARMax2 2GPM 12V 35PSI
In stock
AED 517.00
EEPN 04.21.0138 OEM 31295-3512-3A
Loading...

Adding to Wish List...