Grey water discharge system GWDS24 24V complete
Description
Sani-processor for Grey water discharge system, complete, 24 volt
GWDS24
In boats without natural fall from shower tray or washbasin into the holding tank, the VETUS grey water discharge system takes over this function.
The GWDS consists of a watertight housing with a discharge pump and automatic float switch. The pump produces very low noise. A non-return valve is fitted in the discharge line.
The bottom of the GWDS assembly must be at least 6 cm below the shower tray or washbasin outlet. The waste water tank can be located up to 4 metres above the GWDS unit or up to 20 metres away from it.
Instead of pumping the waste water into the holding tank, it can of course also be discharged directly overboard. If the system becomes clogged, the housing cover can be easily removed to clear the blockage.
General Specification
| EE Part number | 04.04.0002 |
| OEM part number | GWDS24 |
| Voltage | 24 V |
| Amps | 14.5 A |
| Power consumption (W) | 340 |
| Dimensions (LxWxH)mm | 300 x 165 x 145 |
| Pump capacity at discharge height of 4 metres | 44 LPM |
| Maximum liquid temperature (°C) | 35˚C for a short period |
| Capacity of container | 3.5 Liters |
| Maximum vertical lift | 4 m |
| Maximum horizontal displacement | 40 m |
| Noise level | 40 dB(A) |
| Protection | IP44 |
| Weight | 3.5 kg |
| Connections | 1x ø 40 mm 1x ø 32 / 40 mm 1x ø 12 mm 1x ø 19 mm (drain) |